Shot of meeting space and dining table from above.
Meeting space on Prada's side of the beam: It is filled with mannequins dressed in Prada's latest designs, and also bright/different coloured clothing specifically designed for Madonna. This space allows them to collaborate and talk about their views on fashion.
View of the meeting space from Prada's side standing on cloth that's tugging on the beam.
Close up of meeting space and dining table. *Prada's side (the side closer to us) is filled with strings of fabric with basic designs and simple tones such as dark grey and white. The fabric on Madonna's side is more brightly coloured with violet, light blue and red. They get off their elevators at each other side (meaning the elevator from Prada's space would travel a bit further and get off at Madonna's side of the beam, and vice versa) so they get to experience and appreciate each other's styles.
Close up of an elevator control button. 2 of these buttons are located next to the meeting space on the beam, one triggering Madonna's elevator and the other Prada. The wait for the elevator is approximately 1 minute as it has to travel from its initial location to the beam. (Make sure you shoot all over the button for like 10 seconds + and 'Please Wait' pops up - especially for the one for Prada). You can peek through the fabric or walk towards Prada's side to check if the elevator is responding, alternatively, you can also shoot towards the button within the elevator from the beam (just roughly) and once it starts moving, walk back to the button located on the beam and wait for it.
Note* the mannequins in the 3rd image above were downloaded from google warehouse.
File Name: Mannequin with Clothes
Uploaded by MoniqueEliseSketcher
Below: Videos showing how u get onto the chairs in the meeting space from each direction.
Texture used:
The colours above were chosen from photoshop. They were used for the fabric and mannequins.
This 'tension' texture above was applied to one of the strings of fabric attached to the ring.
The linear texture above was used for the metal base of the mannequins.
The tension texture above was applied to the ring. it shows the different directions it is being pulled upon on. The pink represents Madonna.
The scalar texture above was used for some of the fabric as a clean and simple design.
No comments:
Post a Comment